All existing graffiti cleaners contain evaporating components that must be able to dissolve the binder of the graffiti present. These components are sensitive to their ambient temperature. The lower the temperature, the slower the resolution of these components. In practice, this means that removing graffiti at a low temperature requires a little more time.
The anti-graffiti coating systems B-Wax and Articoat are normally applied on porous mineral surfaces. It is necessary to always apply two coats of B-Wax or Articoat. The first layer acts as a primer. A second coat must be applied after a minimum drying time of approximately two hours. This second layer of B-Wax or Articoat remains on the surface of the treated substrate.